Product DescriptionThis is a cooling kit that contains one very high output 4" cooling fan (ball bearing motor), two grill/finger guards, electrical connector with 2 foot of cable (2 wire, ground to frame) and 8 screws to mount the fan guards. You may not use all the screws if you are mounting in your own frame that is thicker than sheet metal. Can be bolted to just about any surface. 120V power, .26A draw. (abotu 32 watts) 230VAC version also available with same airflow by phone. These are heavy duty fans designed for a decade or two of constant cycling.
If you use more than one, be sure to aim them properly. Ideally, you would have one, two, etc on one side of the chamber, and air holes on the other side. Having the fans so they blow OUT rather than I works best. The fans have arrows on them that show both the rotation of the blades and the flow of the air. The vent holes should equal somewhere between 1x and 2x the area of the fan itself, to prevent a whirlwind effect.
|Solacure Means Quality|
Solacure ultraviolet lamps aren't just good, we guarantee they are the best. We don't use stock parts anywhere in our products. Our glass is a special blend, and more transparent to UVA and UVB. Our 32 watt lamps use 60 watt rated cathodes and are tested at almost 70 watts of power. Almost all our lamps have built in reflectors. All are designed to be overdriven to extra high wattages. We test, and test, and test our lamps.
We stand behind everything we sell and guarantee each will perform exactly to specification, or we will replace them. We don't want your business this week, we want it every week, and we are willing to earn it. There really is a difference in quality when it comes to ultraviolet bulbs, and Solacure tops the list.
Buy with confidence: We like what we do, and we've been doing it for over 30 years.
Got a question? The best way is usually to email us using this handy form. We check mail after hours and on weekends, so it really is faster than calling when you have a simple question.